• Thegreenbow Network & Wireless Cards Driver Download
• Thegreenbow Network Provider
• Thegreenbow Network Activate
• Thegreenbow Network Login
• Thegreenbow Network Services

TheGreenBow VPN Client is a third-party VPN client application that makes it possible for a host device to configure a secure connection for site-to-site IPSec tunnel with the RV34x Series Router. In the diagram, the computer will connect to the file server in the office outside its network to access its resources. Welcome on the TheGreenBow special download page. This page enables to download patches, custom, specific or fixing releases. Driver Update - ONLY for Version 6.41.003 & Windows 10. Download DriverUpdate-2.6.x.2.exe. Important: Do not install this driver in other os than Windows 10. Make sure that you have VPN Client Version 6.41. Download Driver Ubit WIE7265 Gigabit PCI-E 1200Mbps WiFi Card with Bluetooth 4.2 - Ubit Bluetooth WiFi Card AC 1200Mbps, Wireless WiFi PCIe Network Adapter Card 5GHz/2.4GHz Dual Band PCI Express Network Card with Bluetooth 4.2 and 2 Antenna for Desktop/PC Gaming via Google Drive.

VPN Overview

A virtual private network (VPN) is a way to use a public telecommunication infrastructure, such as the Internet, to provide remote offices or individual users with secure access to their organization's network. In the past, companies would have rented expensive systems of leased lines to build their VPN only they could use. A VPN provides the same capabilities at a much lower cost.
A VPN works by using the Internet while maintaining privacy through security procedures and tunneling protocols such as the Layer Two Tunneling Protocol (L2TP) or IPSec. In effect, private data, being encrypted at the sending end and decrypted at the receiving end, is sent through a 'tunnel' that cannot be 'entered' by any other data.

Definition: IPSec (Internet Protocol Security) provides security services at the IP layer by enabling a system to select required security protocols, determine the algorithm(s) to use for the service(s), and put in place any cryptographic keys required to provide the requested services. The IPsec architecture is described in the RFC-2401 (www.ietf.org RFC-2401). IPSec has been selected to be embedded in IPv6. IPSec is strong because it was designed to be strong and replace some older methods like PPTP.
Today IPSec is the most secure way to access the corporate network from the Internet, here are some elements why:

• Strong encryption mechanisms like Encapsulated Security Payload (ESP) using DES, 3DES, AES with long key length (i.e. 128, 192, 256)
• Strong authentication of parties identity with the use of X-Auth and Certificate with long key length (i.e 1536, 2048)
• Use of Internet Key Exchange (IKE) and ISAKMP to automatically exchange keys and mutual authentication.
• Protection against denial of service attacks. The IPSec protocols use a sliding window. Packets are numbered and only accepted if they fit the window.
• Use of USB Stick, USB Token in conjunction with IPSec Client software to protect identity/authentication information and VPN configurations (i.e. a TheGreenBow specific feature).

Definition: Network Address Translation (NAT) is designed to decrease IT manager frustration for scarce public IP addresses. A NAT device takes a packet's originating private IP address, translates that address into a public IP address, before sending the packet across the Internet to its destination. NAT devices use an internal table to keep track of translated addresses but unfortunately manipulate the packet's original IP header, impacting IPSec ability to function. IETF (Internet Engineering Task Force) group worked out a solution called NAT Traversal (NAT-T RFC-3193). NAT Traversal is now widely implemented in routers and appliances.
TheGreenBow VPN Client supports NAT-T drafts 1, 2 and 3 (include udp encapsulation).

Thegreenbow Network & Wireless Cards Driver Download

The differences between Transport mode and Tunnel mode can be defined (www.ietf.org RFC-2401) thought the following network configurations:

• Tunnel Mode is most commonly used whenever either end of a security association is a security gateway or both ends of a security association are security gateways, the security gateway acting as a proxy for the hosts behind it. Tunnel mode encrypts both payload and the whole header (UDP/TCP and IP).
  
  
• Transport Mode is used where traffic is destined for a security gateway and the security gateway is acting as a host e.g. SNMP commands. Transport Mode encrypts only the data portion and leaves the IP header untouched.
  
  

TheGreenBow VPN Client supports both modes.

Computer authentication by IPSec is performed by using preshared keys or computer certificates. A pre-shared key identifies one party during Authentication Phase. Per definition, 'Pre-shared' means you have to share it with another party before you can establish a secure VPN tunnel.
The strongest method of authentication is the use of a PKI and certificates. However, smaller organizations cannot afford the implementation of a PKI system and a well managed preshared key method can be easier and just as powerful.
TheGreenBow VPN Client supports both modes.

Thegreenbow Network Provider

Please see our IPSec versus SSL page where we compare both technologies.

Thegreenbow Network Activate

DPD or 'Dead Peer Detection' is an Internet Key Exchange (IKE) extension (i.e. RFC3706) for detecting a dead IKE peer. This mechanism is used by the Redundant Gateway feature.

Thegreenbow Network Login

Yes. A new checkbox appeared in VPN Client release 5.0 to disable DPD easily. Go to the 'Configuration Panel' > 'Global Parameters' > then uncheck the 'Dead Peer Detection (DPD)' checkbox.

Thegreenbow Network Services