Connect your Thuraya XT with the PC/laptop via USB data cable Select Start Settings Control Panel System Device Manager. Check the USB serial port of Thuraya XT (e.g. Select Start Settings Control Panel Phone and Modem. Initially you will need to install a standard USB Modem Driver to work with the unit station. To do this, on your PC go to Control Panel Phone and Modem options and select the Modem tab. Select Add make sure you tick Don’t detect modem I will select from list then NEXT. Select the Standard Modem type and 2400bps Modem. Installing the Thuraya XT modem on a PC or laptop: Connect your Thuraya XT with the PC/laptop via USB data cable; Select Start Settings Control Panel System Device Manager. Check the USB serial port of Thuraya XT (e.g. Select Start Settings Control Panel Phone and Modem. Select the Modems tab and press Add. Your PC must support an Ethernet, USB or Wireless LAN interface to operate with Thuraya IP. The CD ROM contains USB drivers for Windows 2000, XP, Vista and MAC OS10.3 and later operating systems. If you intend to use the Thuraya IP. Australian Satellite Phones, and Networking Devices - Pacific Rim Australia and Pacific Rim USA. Pacific Rim is a specialist in personal communication systems providing transnational, regional or global coverage from a constellation of satellites accessible with small.
Land Voice
Marine
Legacy
Requirements for upgrade:
• Thuraya SatSleeve for Android
• SatSleeve upgrader program (available from this page) Sphairon access driver.
• USB data cable (included in your SatSleeve packaging)
• PC with Windows 8/8.1, Windows 7 or Windows Vista
Firmware upgrade
For upgrades related to the SatSleeve for Android, please refer to the relevant sections below. Before upgrading a SatSleeve, please check which firmware is installed (SatSleeve > Settings > Device Info > Firmware version). Perform the upgrade only if Thuraya releases a firmware version newer than your existing one.
Please follow the below steps:
Step 1
Download the below SatSleeve Upgrader program.
Run the setup file - the Upgrader program including the USB driver will be installed.
Thuraya Modems Drivers
Step 2 Veebeam usb devices driver vga.
Download the latest Thuraya SatSleeve firmware release to your hard disk.
- Latest SatSleeve Firmware release v1.2.1
Release notes of v1.2.1:
- Fixed GPS rollover issue
Step 3
Connect your SatSleeve with the PC/laptop via USB data cable.
You can now start the SatSleeve Upgrader program and locate the firmware on your hard disk. The Upgrader program will help you through the upgrade process.
Using SatSleeve as Data Modem
For Windows XP, Windows Vista and Windows 7
Step 1
Download the below SatSleeve Upgrader program. This program also contains the required driver for connecting your SatSleeve to a PC or laptop to use the Internet in satellite mode via the SatSleeve.
Run the setup file - the Upgrader program including the USB driver will be installed.
Step 2
Installing the SatSleeve modem on a PC or laptop:
- Connect your SatSleeve with the PC/laptop via USB data cable
- Select Start > Settings > Control Panel > System > Device Manager
- Check the USB serial port of SatSleeve (e.g. COM40)
- Select Start > Settings > Control Panel > Phoneand Modem
- Select the Modems tab and press Add
- Check the box of “Don’t detect my modem; I will select it from a list.” and press Next
- Select and press Standard 56000 bps Modem and press Next
- Select the USB serial port that you previously checked on step 3 and press Next
- When the modem installation is completed, press Finish
Step 3
Creating a dial-up connection:
- Select Start > Settings > Control Panel > Networkand Sharing Center
- Select and press Set up a new connection or network
- Select and press Set up dial-up connectionand then Next
- Enter *99#on the Dial-up phone number field. (Optionally you can enter user name and password)
- Enter connection name and press Connect
- Use the Internet via the newly created dial-up connection.
For Windows 8/8.1
Step 1
Download the below SatSleeve Upgrader program. This program also contains the required driver for connecting your SatSleeve to a PC or laptop to use the Internet in satellite mode via the SatSleeve.
Run the setup file - the Upgrader program including the USB driver will be installed.
Step 2
Installing the SatSleeve modem on a PC or laptop:
- Connect your SatSleeve with the PC/laptop via USB data cable
- Select Start > Control Panel > System > Device Manager
- Check the USB serial port of SatSleeve (e.g. COM40)
- Select Start > Control Panel > PhoneandModem
- Select the Modems tab and press Add
- Check the box of “Don’t detect my modem; I will select it from a list.” and press Next
- Select and press Standard 56000 bps Modem and press Next
- Select the USB serial port that you previously checked on step 3 and press Next
- When the modem installation is completed, press Finish
Thuraya Modems Drivers Test
Step 3
Creating a dial-up connection:
- Select Start > Control Panel > Network and Sharing Center
- Select and press Set up a new connection or network
- Select and press Set up dial-up connectionand thenNext
- Select and press Connect to the Internetand thenNext
- Select and press No, create a new connectionthenNext
- Select and press Dial-up ConnectionthenNext
- Enter *99# on the Dial-up phone number field. (Optionally you can enter user name and password).
- Enter connection name and press Connect
- Use the Internet via the newly created dial-up connection.
For Windows 10
- Select Start > Control Panel > Network and Internet > Network and Sharing Center
- Select and press Set up a new connection or network
- Select and press Connect to the Internetand thenNext
- Select and press Set up a new connection anyway
- Select and press No, create a new connectionthenNext
- Select and press Dial-up (Connect using a dial-up modem or ISDN)
- Enter *99# on the Dial-up phone number field. (Optionally you can enter user name and password)
- Enter connection name and press Connect
- Use the Internet via the newly created dial-up connection.